Traceable Virtual Sea Trials in the Marine Robotics Unity Simulator for Manoeuvring Assessment of Unmanned Surface Vehicles

Engineering notes

Engineering notes will be added by the Robot Papers editorial team.

Chinese explanation / 中文解读

中文解读待补充：本站会优先为 VLA、具身智能、人形机器人控制、机器人操作等高价值论文补充中文说明。

Original abstract

Accurate identification of hydrodynamic derivatives is essential for control and navigation of Unmanned Surface Vehicles (USVs), but high-fidelity manoeuvring data from physical sea trials are constrained by cost and safety. Turning Circle (TC) and Zig-Zag (ZZ) trials remain fundamental to IMO and ITTC assessment procedures. This paper extends the Marine Robotics Unity Simulator (MARUS) by introducing a standardised Virtual Sea Trial framework for automated execution and data generation of TC/ZZ manoeuvres, with traceable command-actuation logging, system-identification (SI)-focused data conditioning, and automated extraction of IMO/ITTC-aligned manoeuvring metrics. A key contribution is a dedicated TC/ZZ data acquisition and post-processing pipeline, improving the repeatability and auditability of simulator-based manoeuvres while producing SI-ready datasets for hydrodynamic-derivative identification and digital-twin workflows. Another feature is explicit command-execution separation for differential-thrust steering, where inputs are recorded as ordered rudder-equivalent commands and realised actuation is logged as an execution-level proxy derived from applied thrust. Case-study results demonstrate repeatable and compliant manoeuvre behaviour. For TC tests, the normalised advance differs by approximately 3.9 percent between port and starboard sides, while the tactical diameter differs by approximately 4.6 to 4.7 percent. For ZZ tests, first and second overshoot excesses remain below 1 degree for both +/- 10 degree and +/- 20 degree manoeuvres, satisfying IMO criteria, while peak yaw rates range from approximately 4.1 to 5.8 deg/s. Overall, the framework provides a repeatable and auditable virtual sea-trial workflow for generating IMO/ITTC-aligned datasets and supporting system identification, hydrodynamic-derivative estimation, and digital-twin calibration.

Links and sources

• Official / arXiv page
• PDF from original source

Comments