Simple Torque-Observation Alignment for Zero-Shot Sim-to-Real Grasping with a Direct-Drive Gripper

Engineering notes

Engineering notes will be added by the Robot Papers editorial team.

Chinese explanation / 中文解读

中文解读待补充：本站会优先为 VLA、具身智能、人形机器人控制、机器人操作等高价值论文补充中文说明。

Original abstract

Torque observations in reinforcement learning remain challenging because simulated and measured torque differ in scale, offset, and noise. In this paper, we propose a simple torque observation alignment method for robots with direct-drive (DD) actuators, in which motor current maps linearly to joint torque through a motor-type-specific torque constant K_tau. First, dynamometer calibration identifies K_tau* and corrects the scale mismatch between simulated and real torque. Second, the method uses delta_tau(t) = tau(t) - tau(t-1) as the observation in both domains to eliminate the constant offset instead of using the direct torque tau(t), which carries a domain-dependent bias. Third, Gaussian noise obtained from the dynamometer measurement data is injected during the learning process. To validate the proposed method, we train a teacher-student grasping policy entirely in simulation and deploy the distilled student on a multifingered DD gripper. The deployed policy performs proprioceptive grasping using only joint positions and torque differences. We conduct an ablation study comparing the proposed method with alternative alignment variants on nine in-distribution (ID) objects. The proposed method achieves 100% grasp success. These results demonstrate that the proposed alignment method improves the robustness of zero-shot policy transfer on the DD gripper against real-world torque-observation mismatches.

Links and sources

• Official / arXiv page
• PDF from original source

Comments